Breville Sage Manometer Pressure Gauge Brew OEM for Espresso Machine SP0001567

1. Just removed the screws in the rear of machine
Removed two screws from underneath one is by the tamper and other by hot spout

2.After removing rear panel lift the top off

3.After removing the top, unclipped the face plate and angled it so you could have access to the pressure gauge rear plate mounts

4.Removed the pressure hose and the pressure gauge and replaced with new
The face plate is a little tricky, but if you unclip from the bottom of it it will come loose

5. Make the blind basket test to make sure there are no water leaks

6. Enjoy !